House Sq-Ft Estimator

Estimate wall or roof square feet from length × width or footprint. Stories scale walls. An optional pitch bump applies only in roof mode. Educational only.

  • Walls or roof
  • L×W or footprint
  • Educational only
Estimate
Size
Stories

Stories scale wall height (9 ft each). Roof area stays the footprint.

Area math stays in this browser. A quote request is sent only if you submit the form below.

Get a local soft wash quote

Send the job size from this estimate. This page does not sell washing services and does not promise a crew, price, or appointment.

A house square-foot estimator answers a practical question: about how many square feet of wall or roof are you talking about? Enter the rectangle — length and width — or a single footprint. Toggle walls versus roof. Stories of 1 or 2 change wall height only.

Walls use 2 × (L + W) × 9 ft × stories and do not deduct openings. Roof uses the plan footprint. The optional pitch bump is an educational 6/12 factor, not a measured rafter length. Results are not a takeoff.

Area math runs in your browser. A quote request is sent only if you submit the form after results. Browse the Household hub, or open the soft wash mix calculator, vinyl siding cleanability checker, or roof algae severity quiz.

How to use the house sq-ft estimator

  1. Choose walls or roof.
  2. Enter length × width, or a footprint in square feet.
  3. Set stories to 1 or 2. Stories affect walls only.
  4. In roof mode, optionally add a typical 6/12 pitch bump.
  5. Read the wall or roof estimate, then optionally open the mix calculator.
  6. Optionally submit name, phone, ZIP or city, surface, and square feet for a local quote request.

Frequently asked questions

How do you estimate house wall square footage?

A common educational estimate is 2 × (length + width) × wall height × stories. This page uses 9 ft per story and does not subtract windows or doors. If you enter footprint only, the calculator treats that area as a square so it can estimate a perimeter.

How do you estimate roof square footage from a footprint?

Plan area is length × width, or the footprint you type. An optional 6/12 pitch bump multiplies that plan area by about 1.118. Stories do not change roof area on this page — one roof still sits over the same footprint.

Is a house square-foot estimator a contractor takeoff?

No. Results are educational envelope estimates. Real takeoffs measure openings, dormers, pitch, and waste. Do not treat the number as a bid quantity or a promise that a wash is needed.

Can I send this area to a soft wash mix calculator?

Yes. After an estimate, use the link to the Soft Wash Mix Calculator and enter the wall or roof square feet there. Mix math is a separate educational tool.

What happens when I request a local soft wash quote?

After a complete estimate, the form collects name, phone, ZIP or city, surface, and square feet. Surface and square feet prefill from walls (siding) or roof when possible. This site does not sell washing services and does not promise a price, crew, or appointment.